Projects

Customer Issue: Mr. Dawson wanted to get his air duct vents cleaned, as it had been a while, and he knew that clogs in them made it far more difficult for air to pass through.
Our Solution: Our experts meticulously took care of each vent in Mr. Dawson’s home one at a time to make certain that each was thoroughly cleared of blockages. We use a tough brush to scrub and knock free the dust, and pet hair clinging to the slats. Our technicians then use a high-powered vacuum to remove the loosened substances.

Customer Issue: Mr. Dejesus’ really needed to repair a couple of a house’s banged up old vents before searching for buyers.
Our Solution: The screws holding the vent plates in were still in decent shape, so their removal was simple with electric drill work. After prying the frames loose from there, our operation finished by cleaning the duct entrance rims and attaching the same sized replacement grates with fresh screws.

Customer Issue: Mrs. Gersh’s apartment complex hadn’t received air duct maintenance in a long time and had multiple holes and seams in the ducts.
Our Solution: This multi-day operation had us opening and closing drywall panels and removing and replacing sealant throughout the two story building. Several of the air ducts needing patching or sealing, and at the end each was pressurized to test for leaks by sight and sound.

Customer Issue: Mr. Hartman’s doctor suggested he have his HVAC system cleaned.
Our Solution: Our team arrived on the scheduled appointment day. Using our high-quality vacuum, brushes, and special blowers, we thoroughly cleaned all parts of his HVAC system properly. He was quite pleased with the results and took before and after pictures to show his doctor.

Customer Issue: Dirty air ducts.
Our Solution: We inspected the property’s HVAC system and cleaned the air ducts along with the air vents and furnace surfaces. We significantly reduced the amount of pollutants which may have triggered the customer’s allergies.

Customer Issue: Lint and debris blocking the air flow in the dryer duct.
Our Solution: We used a powerful vacuum and industry-recognized rotating brush, which enabled us to remove blockage from Mr. Barrow’s dryer duct. The result was a functional venting system of his dryer.

Customer Issue: Leaky air ducts.
Our Solution: We discovered air leaks in the areas where two sections were joined and around the registers. We sealed the leaks using high-quality mastic. To give our customer the best result, we also cleaned the air ducts.

Customer Issue: The air vents were filled with dust and debris after a home improvement project.
Our Solution: The vent was fairly narrow and included many turns, which required extra care on our part. We chose the most suitable tools and equipment and cleaned every inch of the vent.

Customer Issue: The HVAC system was pumping dust into the rooms.
Our Solution: Our inspection revealed large amounts of dust inside the air ducts. We used special brushes and a vacuum to remove the dust, and then we replaced the air filter with a new one that has a higher MERV.